Thursday, August 25, 2011

D-Link DWA-110 external antenna possibility


I just received a DWA-110 today, I cracked it open to take a look at the PCB since I heard rumors from this forum post here that there may be the possibility of adding a pigtail to this adapter and attaching an external antenna.
They say its a U.fl RF connector, if it is, then it's either A) Missing the middle pin or B) Female or it's not a U.fl connector at all.
I was hoping to get some insight on this and will tag further posts with 'dwa110' with updates on this particular investigation.

2 comments:

  1. I know this is an old post but i have a WN111V2 from netgear, works good, but i needed it to work better so i popped mine open, I actually have 2 male ends which are the antenna's, i took an old Linksys gateway apart and stole the antenna off of that and it plugs right into the slot and now i have 5 bars all the time with it.

    ReplyDelete
    Replies
    1. It's always good to share little bits of information! Thanks

      Delete